Err

FR EN
+33(0) 9 73 56 82 24
Contact
VIDEOS - RADIOS - DATA LOGGER - IGNITIONS
Your cart 0 0.00 €
Continue Shopping
AIM MXG 1.3 Strada Dashboard
AIM MXG 1.3 Strada DashboardAIM MXG 1.3 Strada DashboardAIM MXG 1.3 Strada DashboardAIM MXG 1.3 Strada DashboardAIM MXG 1.3 Strada DashboardAIM MXG 1.3 Strada Dashboard

AIM MXG 1.3 Strada Dashboard

AIM
(Code: SR_AIM_546)
In Stock
The new MXG 1.3 Strada Dashboard is a 7'' colour display with great visual impact, configurable to display lap time and information from multiple data sources.
14 pins Standard harness
GPS09 Module
1,800.00 €
1000g
Add to cart
The MXG 1.3 Strada is a wide size colour TFT dash for road use.

A wide range of data sources

MXG 1.3 Strada is a 7" colour display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined maths channels and - optionally - the GPS09 Module.

Freely configurable pages

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed by pushing one or two pushbuttons.

High contrast TFT display

A high contrast TFT display identifies MXG 1.3 Strada at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels.

aim MXG 1.2 Strada shop-racing

Flexible alarms & custom street icons

MXG 1.3 Strada features 8 configurable RGB alarm LEDs : you choose the conditions, you choose the colours. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. 

Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according to your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customised icons.

Two digital outputs

MXG 1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU. This permits it to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

mxg 1.2 strada digital output

Camera inputs

Two analog camera inputs are available, to swap your screen in a mirror camera, by push-button control or event management.

Integrated shift light

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like, and for each unique gear when required.

mxg 1.2 strada shift light
 

A modular system

Using the built-in CAN bus you can add expansion modules to visualise additional info: GPS09 Module, Channel Expansion to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. 

Two of these channels can be configured to receive digital inputs like wheel speed, Hub Thermocouple, wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetor, SmartyCam HD camera, the on-board cameras that overlays on videos the data sampled by your logger.
mxg 1.2 strada evolution shop-racing

Race Studio 3 Configuration

MXG 1.3 Strada is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Maths channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.

Technical specifications

 

Technical characteristics - MXG 1.3 Strada

Display

7" TFT display

Resolution

800x480 pixels

Contrast

1000:1

Brightness

700cd/m2 - 1,100 Lumen

Ambient Light Sensor

Yes

Alarm LEDs

8 RGB freely configurable LEDs

Shift lights

10 RGB  freely configurable LEDs

CAN connections

2

ECU connections

CAN, RS232 or K-Line

Connexions external modules

Yes

Expansion CAN connection

GPS09, Channel Expansion, Thermocouple Expansions, Lambda Controller, SmartyCam HD

Analog Inputs

8 fully configurable, 500Hz max each

Digital Inputs

1 speed inputs, coil RPM Input

Connectors

2 motorsport connectors + 1 Binder connector

Digital Outputs

1 (1A max)

Inertial Platform

No

Internal Memory

No data acquisition

Body

Anodized Aluminium

Pushbuttons

Metallic

Dimensions

237 x 127,6 x 26 mm

Weight

950g

Waterproof

IP65

Power Consumption

400mA

Contents of the box :


- MXG 1.3 Strada,

- USB Cable,

- 14 Pin Standard Wiring,

- Race Studio 3 Software.


AIM Reference : XA8MXGST12A010 MXG 1.3 Strada with CAN harness (ECU)